EEPROM Settings
$0=10 (Step pulse time) $1=255 (Step idle delay) $2=0 (Step pulse invert) $3=0 (Step direction invert) $4=0 (Invert step enable pin) $5=0 (Invert limit pins) $6=0 (Invert probe pin) $10=1 (Status report options) $11=0.010 (Junction deviation) $12=0.002 (Arc tolerance) $13=0 (Report in inches) $20=0 (Soft limits enable) $21=1 (Hard limits enable) $22=1 (Homing cycle enable) $23=3 (Homing direction invert) $24=25.000 (Homing locate feed rate) $25=1000.000 (Homing search seek rate) $26=250 (Homing switch debounce delay) $27=1.000 (Homing switch pull-off distance) $30=10000 (Maximum spindle speed) $31=0 (Minimum spindle speed) $32=0 (Laser-mode enable) $100=80.000 (X-axis travel resolution) $101=80.000 (Y-axis travel resolution) $102=400.000 (Z-axis travel resolution) $110=2000.000 (X-axis maximum rate) $111=2000.000 (Y-axis maximum rate) $112=1200.000 (Z-axis maximum rate) $120=300.000 (X-axis acceleration) $121=300.000 (Y-axis acceleration) $122=30.000 (Z-axis acceleration) $130=400.000 (X-axis maximum travel) $131=380.000 (Y-axis maximum travel) $132=55.000 (Z-axis maximum travel)
